Download brochures and drawing files below. For DWG files, please request from our team.
If you’re trying to find the right roof panels for your needs, just ask us. Our experts will be able to assist with insulation specifics, technical solutions, measurements and onsite needs. Give us a call on 0800 799 923 or contact us online.
We’ll be happy to provide any guidance and services you need.
All panels have steel facings, with a coating suitable for use around New Zealand. For extreme marine locations, please reach out to us directly as there could be limitations.
Panels are 1000 mm wide for roofing and architectural wall panels, and 1100 mm wide for coolroom panels. Lengths can vary between 2.4 m – 24 m. Stock panels are available at fixed lengths; please refer to the product pages to purchase these directly.
Lead time is generally 3–5 weeks. This is subject to the colour and specification chosen.
The liner sheet of our roof panel can be both ribbed (standard) and flat. The standard colour on the liner is titania.
Conqueror panels do not have CodeMark, but they are fully compliant with the NZ Building Code. Please refer to the individual datasheets for more information.
Panels can be used in many applications including residential housing, sheds, sleepouts, conservatories, offices, classrooms and much more.
No. At this time we have not undertaken any specific firewall testing.
Yes. Please email your enquiry and we will endeavour to respond as soon as possible.
Most buildings do not need expansion joints, but you should always consult directly with the project engineer, as they may have specific reasons for including them.
External facings – These typically use a Colorsteel Maxam coating, suitable for use in most of New Zealand.
Internal facings – The coating used is suitable for multiple applications. If you are operating in aggressive corrosion areas, please consult with us as the standard liner may need to be altered.
No. Coolroom and architectural panels are classed as flat, but the roofing panels have a trapezoidal exterior facing.
Span depends on panel thickness, wind & snow loads, support structure and other factors. Please refer to the specific product datasheets for detailed span tables.
Conqueror Panels have been tested to various New Zealand building code requirements. Please refer to the specific product datasheets for further information.
No. Once the panel and panel joint are secured, no further action is required. If needed, refer to the installation details on our website.
Similar to other roofing or cladding materials: weatherproof junctions by adding appropriate flashings. Please refer to our standard detail drawings for guidance.
